Produktbeskrivning på engelska:
or color-timing Ektachrome®, E100, E-6 compatible film. “TungstenChrome” cool-tone 3200K 1st Developer renders approximately 6+ stops of usable dynamic-range* with cleaner whites, and moderately enhanced color saturation. Single-use 1+1 dilution develops 8-16 rolls or 100ft of Ektachrome®.
Intended to be used with the Cr6 "Color&Reversal" 2-in-1 Slide Solution and the Bf6 "Bleaches&Fixer" 3-in-1 Slide Solution. Cs6 "Creative Slide" 3-Bath Kits also available here
The Cs6 "Creative Slide" 3-Bath Process makes complicated chemistry simplified alchemy! The number of processing baths for E6 film is reduced from 6 to 3. The reversal step occurs during color development in a Color&Reversal bath, and the bleach and conditioner steps are combined with the fixing step in a Bleaches&Fixer bath. Color-timing is performed with alternative 1st Developers to achieve full creative control of your slides.
Photo by Stephen Schaub on Kodak E100 pushed to EI 800 in T6 1st developer
Features:
- Tungsten-balanced 3200K for artificial light or cool-tone E100 slides
- 1000ml stock solution makes 2000ml of working solution (diluted 1+1 with water)
- Single-use solution has a capacity of 8-16 rolls (135/120), 32-64 sheets (4x5), or 100 feet (35mm) of film
- Approximately 6+ stops of usable dynamic-range*
- Vibrant color rendering
- Low D-min for brighter whites and clean highlights
- Moderately enhanced color saturation
- Push process using dilutions and development times in 6-8min
- Image archivability for at least 80 years
- Easily mixed powder concentrate
Mixing stock solution:
Place 600-700ml of water into a clean glass or plastic pitcher.
Use a clean plastic stir stick or the TCS-1000 to circulate the liquid.
While circulating, add the contents of the powder packet.
Top off solution with water to make 1000ml. Mix well.
Store mixed solution in a tightly capped, completely filled storage container for 2-6 weeks. Yellows with age and turns amber when perished. Oxygen and contaminants cause developing agents to perish.
Cool-Tone Development: 1+1 Dilution ~ 6min @104°f (40°C)
Push +1: Stock Solution ~ 6min or 1+1 Dilution ~8min
Push +2: Stock Solution ~ 8min
Maintaining temperature is not essential beyond pouring in the 1st developer. When a temperature control bath is not available, simply preheat the 1st Developer +2ºF warmer, and the other baths will automatically process-to-completion as they cool down. Only the 1st developer is time and temperature critical because it controls contrast and color.
* ”Usable dynamic-range” is the amount of full stops of exposure value that renders acceptable detail and color. “Total dynamic-range” however, is the maximum range containing tonal separation rendering any detail, and is often twice the usable dynamic-range. The usable dynamic-range of conventional slide film is between 6-8 stops (total 14-16 stops). Color negative is between 9-13 stops (total 16-21 stops). Digital sensors are mostly between 7-10 stops (total 12-15 stops).